Specifications
About PC Environment
A separate PC is required for the development and playback of the Spatial Reality Display. The Spatial Reality Display requires a PC with a high-speed CPU and GPU to render 3DCG in real time at 4K60P. Please prepare a PC withthe following specifications.
ELF-SR2 | ELF-SR1 | |||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
GPUs that have been confirmed to work in the Sony environment*4(◎:Confirmed with Unity HDRP)
GPU | Confirmed |
---|---|
Quadro RTX6000*5 | ○ |
Quadro RTX4000*5 | ○ |
GeForce RTX3090 | ◎ |
GeForce RTX3080ti | ◎ |
GeForce RTX3080 | ◎ |
GeForce RTX3070Ti | ◎*7 |
GeForce RTX3070 | ◎*7 |
GeForce RTX3060Ti | ◎*7 |
GeForce RTX3060 | ○ |
GeForce RTX2080Ti | ○ |
GeForce RTX2080Super | ○ |
GeForce RTX2070Super | ○ |
GeForce RTX2070 | ○ |
Radeon RX6900XT | ○ |
Radeon RX6800 | ○ |
Radeon RX5700XT | ○ |
Radeon RX5700 | ○ |
Radeon RX Vega 64 | ○ |
Even under the recommended operating environment, the frame rate may drop significantly depending on the content. For a smooth viewing experience, we recommend a PC with a frame rate of 60 fps or higher.
Verification Test Content: We have confirmed that the following content provided by Unity technology Japan can achieve a frame rate of 60 fps or higher using the SDK. https://unity-chan.com/download/releaseNote.php?id=CandyRockStar
*1: Please check the support status of Unity and Unreal Engine for Windows11 with your game engine provider.
*2: Requires a GPU that supports HDMI output; please use a compatible cable to output at 4K60P.
*3: Requires a USB 3.2 (with a transfer rate of 5Gbps) or higher cable.
*4: Confirmed using Intel i9-9700.
*5: Quadro needs DisplayPort to HDMI Adapter. Sony verified the below products.
*6: Playback of Unity HDRP content requires more GPU performance.
*7: With DLSS (Deep Learning Super Sampling) enabled in Unity 2021.2. For more information about DLSS, please
click here.
Recommended viewing environment
To get the most out of your Spatial Reality Display, it's important to have a good viewing environment. Place the Spatial Reality Display in a location where it will not be exposed to outside light. Reflections on the display may impair the three-dimensional effect.
The area around the screen must be adequately bright enough to recognize faces as it recognizes the line of sight through a high speed vision sensor. Please refer to the specs below to prepare your viewing environment.
Item | Spec |
---|---|
Illuminance | Ambient illumination of 100 lux to 1,000lux and over 100 lux on the face |
Viewing Distance | 30-75 cm(ELF-SR1) / 50-100 cm(ELF-SR2) |
Viewing Angle | (Horizontal)±25° (Vertical) -40°/+20° |
Temperature | 0-40 ℃ |