They are self-extracting files.
Please download and decompress it first, then install it.
After decompression, please read the ReadMe and installation guide included in exe.file for further information.

They are compressed archive files encoded to BinHex.
You need a freeware utility such as the "Stufflt Expander" which supports BinHex decoding function.
After decompression, please read the ReadMe and installation guide included in exe.file for further information.

*Please note that you may need to change the SCSI device type by the printer's front panel operation as per your
using Operating System.

Change the SCSI device type to "3" for Windows 95 only and leave the type "2" for other Operation Systems. Do not
forget to change it back if you used the printer with Windows 95 before. Please refer to the User's Guide for the operation.

*About Adaptec SCSI Card/ SCSI Boad

Please note that you may need to consult with your nearest dealer if you use any high speed synchronous SCSI cards
such as AHA-2940U2W or Adaptec SCSI driver Ver.2.10 or greater. The following problems may be happened in such case:
- The system may be hanged up.
- You may not see the printer port.

*When you are using WindowsNT4.0 or Windows2000 or WindowsXP,

an error message is displayed at the step of installing the Port Monitor because of the long file name if you put the
decompressed file on the desktop. Please put the file in the folder which is not log file name.
Please refer to FAQ for the details.

*When you are using WindowsME

Windows95/98 drivers work on WindowsME.

*To assure the compatibility on Windows95/98, the firmware upgrade for UP-D8800 & UP-5500 with UPK-5502SC
maybe required. Please contact your local authorized reseller for further information.

*Please use Photoshop Ver.3.0.5 or later with the Plug-in modules on Windows95. Printer name "UP-DXXXX"
won't appear on "Export.." menu.

*For SCSI connection, Windows95 drivers work fine on Windows98 if the firmware is the latest version. About the
installation on Windows98, please refer to the following files.

1. Installation for SCSI SCSI-E.EXE (196KB) (UP-D8800)

*When you are using Printer Driver for WindowsXP

Parallel connection is not available.

*When you are using Printer Driver for WindowsNT4.0/2000

Parallel connection is not available.
Please note that there may be cases that your PC does not start up if your printer firmware is old. In such case,
please contact a nearest dealer

*When you are using Printer Driver for WindowsNT95

You need the ROM ver.1.3 or above.

*When you are using P890/891 Spooler for Windows95

Utility for transferring TIFF, BMP or PS file to the TMax P890/891 over the network.

For specifying the defrosting place of a compressed file

1. 1. Double click the downloaded compressed file, then the dialog "WinZipSelf-Extractor" comes up.
2. 2. Specify the destination of the decompressed files on "Unzip To Folder."
3. 3. Click "Unzip" to decompress the downloaded file.
4. ex.) If the destination is C:\Temp, Temp folder on the C drive is made, and the decompressed files are stored in it.

*When you are using P890/891 Photoshop Plug-in Module

Utility for transferring TIFF, BMP or PS file to the TMax P890/891 over the network.