They are self-extracting files.
Please download and decompress it first, then install it.
After decompression, please read the ReadMe and installation guide included in exe.file for further information.
They are self-extracting files.
Firmware upgrade is started automatically after decompressing the file.
They are compressed archive files encoded to BinHex.
You need a freeware utility such as the "Stufflt Expander" which supports BinHex decoding function.
After decompression, please read the ReadMe and installation guide included in exe.file for further information.
Please read this Software License Agreement ("Agreement") carefully before downloading, installing or using the software.
By downloading, installing or using the software, you agree to be bound by the terms and conditions of the Agreement.
*If you use Windows Vista, please refer to this FAQ.
[Version Upgrade Procedure]
Note: Do not turn off the printer during LED is flashing...Don't Turn Off!!"
* 1. Double click the downloaded compressed file, then the dialog "WinZipSelf-Extractor" comes up.
* 2. Specify the destination of the decompressed files on "Unzip To Folder."
* 3. Click "Unzip" to decompress the downloaded file.
Double-click the decompressed executable file "SonyCxUtility".
For information about how to use the utility software "Sony UP-CX Series Utility", please refer to the Readme.
- Your UP-CX1 printer firmware has to be version 1.31 or higher in order to run the utility software.
If your current firmware version is below 1.31, please upgrade the firmware.
The version of your firmware can be found at the Properties on the printer driver.
For detailed instructions, refer to the driver setup guide.
| Software | Support OS | Version | Updated Items | Size | Date | Download |
|---|---|---|---|---|---|---|
| Printer Driver | Windows7 32bit/64bit | Ver.1.31 | - | 7.30MB | Apr. 28, 2010 |  |
| Windows XP /Vista /Vista 64 bit | Ver.1.31 | *W-1 | 12.2MB | May. 29, 2009 | |
|
| Windows2000 | Ver.1.00 | - | 5.50MB | Aug. 31, 2006 | |
|
| Firmware upgrade module |
Windows 2000/XP/Vista/7 | Ver. 1.31 | *W-2 | 928KB | Aug. 02, 2010 | Normal firmware (details) |
| 916KB | Aug. 02, 2010 | White Enhanced Firmware (details) |
||||
| Utility software | Windows XP/Vista/7 | Ver. 1.00 | *W-3 | 440KB | Aug. 02, 2010 | |
| Software | Support OS | Version | Updated Items | Size | Date | Download |
|---|---|---|---|---|---|---|
| Printer Driver | Mac OS 10.3, 10.4, 10.5, 10.6 | Ver.1.00 | *M-1 | 14.3MB | Aug. 31, 2006 | |
The following minor bugs are fixed.
- "Matte" is not appeared in the selection on the driver when the OS is Chinese or Korean.
- Paper size is not appeared in the selection on the driver when the OS is Vista Korean version.
ProMatte print became available.
(The firmware greater than version 1.10 is required.)
Support adjusting the print position.
To utilize this feature, the utility software is needed.
New Release
This software allows printer owner to adjust horizontal print position when image is not properly centered on the paper with the use of Windows PC.
The firmware version of the UP-CX1 has to be Ver.1.31 or higher.
New Release(This driver works on Mac OS 10.3, 10.4, 10.5.)
